Easy@Home EBP-095 User Manual - page 7
11
10
MEASUREMENT
1.After selecting the user, press the “START/STOP” to
start measurement, and it will finish the whole
measurement for the selected user.
Take User 1 for example.
Adjust the zero .
LCD display
Inflating and measuring.
Display and save the results. The
corresponding backlight shows
according to the grade of blood
pressure.
Start the Measurement
2.Press “SET”, “MEM” or
“START/STOP” button to
power off, otherwise it will turn
off within 1 minute.
DATA MANAGEMENT
Recall the Records
Date,time will be
shown under the
Pulse by turns.
Before you start the measurement, please press the SET button to choose
either User 1 or User 2 as the User ID. When the desired User ID is shown,
press START/STOP button to confirm the User ID.
1. When the monitor is off, please press the
“MEM” to show the average value of the
latest three records.
2. Press MEM button or SET button to rotate the records. Up to 60
records will be stored under each user ID.
There are 8 records.
The current is the No.1.
The corresponding
time is A.M.10:35.
The corresponding
date is 16th October.
A.M.