Eberspächer HYDRONIC B 4 W SC Instruction Manual - page 13
13
Installation example
Diesel heater in a truck and in a delivery van
Heater
Exhaust silencer
Combustion air hose
Fuse holder
Dosing pump
Fuel suction pipe
T-piece
Installation location
The installation location for the heater is the engine
compartment. The heater must be mounted below the
min. cooling water level (compensation tank, cooler,
vehicle heat exchanger) for automatic venting of the
heat exchanger of the heater.
• The regulations and safety instructions to be
observed for this chapter are stated on page 4 – 7.
• The installation suggestions made in the
installation instructions are examples. Other
installation locations are possible if they
correspond to the installation requirements stated
in these installation instructions.
• Other installation information (e.g. for boats and ships)
is available from the manufacturer on request.
• Observe the tolerable installation position together
with the operating and storage temperatures.
Installation
3
Heater
Exhaust pipe
Combustion air intake silencer
Fuse bracket
Dosing pump
Fuel suction pipe
Installation example
Petrol heater / diesel heater in a car
Please note!