Eberspächer HYDRONIC B 4 W SC Instruction Manual - page 4
4
Introduction
1
Special text structure, presentation and
picture symbols
This manual uses special text structures and picture
symbols to emphasise different contents.
Please refer to the examples below for the
corresponding meanings and associated actions.
Special structure and presentations
A dot (•) indicates a list which is started by a
heading. If an indented dash (–) follows a dot, this list
is subordinate to the dot.
Picture symbols
Regulation!
This picture symbol with the remark “Regulation”
refers to a statutory regulation. Failure to comply with
this regulation results in expiry of the type permit for
the heater and preclusion of any guarantee and
liability claims on J. Eberspächer GmbH & Co. KG and
its associated companies.
Danger!
This picture symbol with the remark “Danger!” refers
to the risk of a fatal danger to life and limb. Under
certain circumstances, failure to comply with these
instructions can result in severe or life-threatening
injuries.....
Caution!
This picture symbol with the remark “Caution!” refers
to a dangerous situation for a person and/or the
product.
Failure to comply with these instructions can result in
injuries to people and / or damage to machinery.
These remarks contain application recommendations
and useful tips for installation of the heater.
Important information before
starting work
Range of application of the heater
The heater operating independently of an engine is
intended for installation in the following vehicles,
depending on its heating output:
• Vehicles of all kinds
• Construction machinery
• Agricultural machinery
• Boats, ships and yachts
The heater must not be installed in motor vehicles
used to transport dangerous goods according to
ADR / ADR 99.
Purpose of the heater
(using the vehicle heat exchanger)
• Heat up the vehicle's water circuit together with the
vehicle engine for adequate heating of:
– Driver and working cabs
– Freight compartments
– Ship’s cabins
– Passenger and crew compartments
– Vehicle engines and units
On account of its functional purpose, the heater is not
permitted for the following applications:
• Long-term continuous operation, e.g. for pre-heating
and heating of:
– Residential rooms
– Garages
– Work huts, weekend homes and hunting huts
– Houseboats, etc.
Caution!
Safety instructions for application and
proper purpose
• The heater must only be used and operated for the
range of application stated by the manufacturer in
compliance with the “Operating instructions”
included with every heater.
Please note!
Please note!