Eberspächer HYDRONIC B 4 W SC Instruction Manual - page 14
14
Installation
3
Mounting and fastening
Position the heater in the holding clips of the heater
bracket and fasten with fastening screw, M6 x 97
(torque 6
0.5
Nm). Mount the heater bracket in a suitable
position in the engine compartment, possibly using
anti-vibration pads if necessary.
Depending on the installation space available, the
heater can be moved sideways in the bracket and
screwed in one of the two fastening threads.
Possible installation positions
The heater should preferably be installed in the normal
position, horizontal with the exhaust connection down
to the bottom. Depending on the installation
conditions, the heater can also be mounted in the
permitted swivel range, see diagram.
Heater in normal position with
permitted swivel range
Swivel range from the normal position
up to max. 90° swivel upwards.
Swivel range from the normal position to
max. 90° swivel around the longitudinal axis.
When the heater is operating, the shown normal or
maximum installation positions can be varied briefly
by up to +15° in all directions. Such deviations
caused by the inclined position of the vehicle do not
impair the heater functions in any way.
Please note!
Heater
Bracket clips
Bracket holder
Fastening screw
fastening thread