EcoQuest Fresh Air User Manual - page 5
SETTINGS AND ADjUSTMENTS
Fresh Air by EcoQuest can be turned on or off, and
adjusted, using either the included remote or the control
panel on the front of the unit . With the exception of the
Reminder Reset button, both the remote and the control
panel buttons have the same functions .
If you are operating your central heating and
air conditioning fan, or other ventilation system,
continuously, set the coverage up to the total
ventilated indoor area. Otherwise, set the coverage up
to the size of the room. Do not exceed the size of the
ventilated indoor area when setting the purifier level.
Power ON/OFF
Fan UP
Away Mode
ON/SET/OFF
Purifier UP
Purifier
DOWN
Fan
DOWN
Normal/
High
Reminder
Reset
Power ON/OFF
Away Mode
ON/SET/OFF
Battery
compartment
(2 AAA)
Normal/
High
Purifier
DOWN
Purifier
UP
Fan UP
Fan
DOWN
POWER (stand by)
Turns the unit ON and
OFF.
FAN UP/Fan DOWN
Adjusts the five speed fan.
NORMAL/HIGH
Toggles the unit between
Normal Mode (RCI and
Ionization) and High Mode
(RCI, Ionization, and
Purification Plate).
Reminder Reset
(control panel only)
Clears the maintenance
reminders after performing
routine maintenance.
Purifier Up/Purifier Down
(high mode only)
Works when unit is in High
Mode to set the purifier
level for the indoor area.
The level is indicated by
both a horizontal bar
graph and square footage
(U.S. models) or square
meters (international
models). The unit will
switch to Normal Mode,
if the PURIFIER DOWN
button is pressed when the
square footage is set to
250 ft2 (23 m2).
Away mode
Turns on and adjusts the
timer for the Away Mode
function. Each press of the
Away Mode button will
increase the time by two
hours, up to eight hours,
then OFF. The AWAY
MODE should be operated
in unoccupied areas only.*
The LCD Screen is used to display all current settings (see
page 4) as well as any maintenance reminders .
LCD DISPLAY
Purifier Setting
Fan Speed
Purifier Coverage
Reminders
(normally blank - reminders appear
here when unit needs maintenance)
4
5
LCD SCREEN BACKLIGhT
As adjustments are being made, the LCD screen backlight
will brighten and the settings on the screen will change .
After 3 seconds, without change, the backlight will return
to normal .
If a maintenance reminder or a service reminder appears,
the backlight will brighten and stay bright until the
Reminder Reset button is pressed or the service problem
is corrected .
english
spanish
*Please note: “unoccupied areas” includes pets. Some
pets, like humans, may experience adverse reactions
from exposure to increased levels of ozone and should
not be present during Away Mode operation.