EcoQuest Fresh Air User Manual - page 6
REPLACE PLATE
The purifier plate is not functioning properly .
• Replace the old purifier plate with a new purifier plate
(available from your local EcoQuest Business Owner) .
REPLACE RCI CELL
The RCI cell is no longer working correctly .
• Replace the RCI cell (replacement RCI cells are available
from your local EcoQuest Business Owner) .
• Please Note: The RCI cell should be replaced every
three (3) years, even if the unit does not display this
message.
PERFORM CLEANING
(approx . every 30 days)
• Clean the rear lint screen (see page 6) .
• Vacuum the
RCI cell.
• Clean the purifier plate (see page 7) .
• Vacuum front and rear grill openings .
RESETTING THE REMINDERS
The only reminder you need to reset is the PERFORM
CLEANING reminder (after performing maintenance,
press the Reminder Reset button and the screen will
momentarily display CLEARED to let you know the
reminder has been cleared) . All the other service reminders
will clear automatically once the unit has been turned off,
and back on, and the problem has been corrected .
MAINTENANCE REMINDERS
Be sure to
press the
Reminder
Reset button
to clear the
reminder
following
regular
maintenance
(see below).
Periodic maintenance is required to insure that your
Fresh Air by EcoQuest operates properly . The unit will
display a PERFORM CLEANING reminder when it’s time
to perform regular maintenance . If you are operating your
unit in a severely polluted environment, cleaning of the
unit, purifier plate, RCI cell, and rear lint screen should be
GENERAL MAINTENANCE
done more frequently . Shown here are basic procedures
that should be carried out to keep your unit running at
top performance .
For optimal performance, and to prevent damage not
covered by your warranty, install the optional Fresh Air
purifier pre-filter .
Failure to perform routine maintenance could adversely
affect the proper function of the unit or cause it to fail
prematurely .
NOTE: If a unit is returned for repair, and it is determined
that neglect of the unit or unauthorized tampering with
any mechanical or electronic component of the unit
caused the failure, EcoQuest reserves the right to void the
product warranty . This will require the owner to pay for
any required repairs .
CLEANING THE CASE:
Wipe the unit with a soft cloth dampened (not wet) with
water . Do not use chemicals or solvents . Vacuum the front
and rear grills periodically to remove any lint buildup .
CLEANING THE RCI CELL:
Remove the RCI cell and carefully vacuum accumulated
lint . Do not wash the RCI cell . Damage from water may
result .
REAR LINT SCREEN CLEANING:
You have two options to clean the rear lint screen:
1 . When visibly dirty, simply remove the rear lint screen
from the unit (see pages 8 - 9), and with a hand-held
vacuum, remove the heavy particulate . This method will
extend the life of the lint screen .
2 . When visibly dirty, remove the lint screen from the
unit (see pages 8 - 9), carefully vacuum, then wash
in hot water (do not use soap) . Allow to dry prior to
reinstalling . Replace if damaged .
REAR LINT SCREEN REPLACEMENT:
Contact your EcoQuest Business Owner for replacement
lint screens . See pages 8 - 9 for removal and installation
instructions .
CAUTION: Unplug the unit before performing any
maintenance procedures.
6
7
GENERAL MAINTENANCE
(CONT .)