ECX RUCKUS Instruction Manual - page 5

5

EN

RUCKUS

4WD

4WD

CAUTION: If using rechargeable 

batteries, charge only rechargeable 

batteries. Charging non-rechargeable batteries 

may cause the batteries to burst, resulting in 

injury to persons and/or damage to property.

1. Slide the panel open on the bottom of the 

transmitter.

2. Obey the battery plus (+) and minus (-) diagram 

in the transmitter to install 4 AA batteries.

3. Slide the panel closed.

We recommend using only alkaline AA batteries 

in the transmitter, however, it is possible to use 

rechargeable Ni-MH batteries.

• Never install damaged batteries.

• Never install batteries of mixed types or of different ages in 

the transmitter.

• Always remove exhausted batteries.

• Always remove batteries before storing the transmitter.

• Low battery power can result in loss of control of the RC 

vehicle.

TRANSMITTER BATTERY SAFETY PRECAUTIONS

REMOVING THE VEHICLE BODY

INSTALLING TRANSMITTER BATTERIES