ECX RUCKUS Instruction Manual - page 7
Other manuals for RUCKUS:
Instruction manual
of
17
7
EN
RUCKUS
4WD
4WD
ON
TIP: Seat the motor brushes by driving smoothly on a fl at surface
during use of the fi rst battery charge. Properly seating the motor
brushes will increase the life and performance of the motor.
GETTING STARTED
1. Power on the transmitter.
2. Connect the battery to the Electronic Speed Control (ESC) /
Receiver unit and power on the vehicle.
3. Do a test of the transmitter’s control of the vehicle with
the vehicle’s wheels off the ground.
4. Start driving slowly. If the wheels are not straight, adjust the
steering trim dial on the transmitter.
INSTALLING THE VEHICLE BODY