ECX Torment ECX4000 Instruction Manual - page 4
4
EN
ChARGING ThE VEhICLE bATTERy
A. Attach the battery connector to the charger as shown.
B. 7.2V NiMH battery
C. Compatible Battery Charger
(Charger power outlet terminals not shown)
A
b
C
The vehicle battery charger produces 500 milliAmps per hour.
Divide the mAh capacity on the label of a battery by 500 to know
how long battery charging will require. For example, an 1800mAh
battery requires 3.5 hours to charge.
• Read all safety precautions and literature prior to use
of this product.
• Never allow minors to charge battery packs.
• Never attempt to charge dead or damaged batteries.
• Never charge a battery if the cable has been pinched or shorted.
• Never allow batteries or charger to come into contact with
moisture at any time.
• Never charge batteries in extremely hot or cold places
(recommended between 50–80°F or 10–26°C) or place
in direct sunlight.
• Always use only NiMH rechargeable batteries. This charger cannot
charge batteries such as “heavy duty,” “alkaline battery,” or
“mercury battery.”
• Always connect the positive red lead (+) and negative black lead (-)
terminals of the battery to the charger terminals correctly.
• Always disconnect the battery and charger after charging
and let them cool between charges.
• Always inspect the battery before charging.
• Always terminate all processes and contact Horizon Hobby
if the product malfunctions.
• Always make sure you know the specifications of the battery
to be charged or discharged to ensure it meets the requirements of
this charger.
• Never connect more than one battery pack to this charger
at a time.
• Always constantly monitor the temperature of the battery
pack while charging.
• Always end the charging process if the charger or battery becomes
hot to the touch or starts to change form during the charge process.
INSTALLING VEhICLE bATTERy
1. Loosen the thumb nuts to remove the battery strap.
2. Install the battery.
3. Reinstall the battery strap.
4. Tighten the thumb nuts to secure the battery strap.
5. Connect the battery.
INSTALLING bODy
1. Body Clips (ECX1048)
1
1