ECX Torment ECX4000 Instruction Manual - page 7
7
EN
GETTING STARTED
1. Power on the transmitter.
WhEN yOU ARE FINIShED
1
2
POWER
ST. TRIM
TH. TRIM
ST. RATE
2. Connect the battery to the Electronic Speed Control (ESC)
and power on the ESC.
3. Do a test of the transmitter’s control of the vehicle with
the vehicle’s wheels off the ground.
4. Start driving slowly and if the vehicle does not go straight,
adjust the steering trim dial on the transmitter.
notIce: Seat the motor brushes by driving smoothly on a flat
surface during use of the first battery charge. Properly seating the
motor brushes will increase the life and performance of the motor.
POWER
ST. TRIM
TH. TRIM
ST. RATE
1. Power off the Electronic Speed Control (ESC).
3. Disconnect the battery.
4. Remove the battery from the vehicle.
2. Power off the transmitter.