Edelbrock 3670 User Manual - Installation and Setup
10
3
Installation and Setup
Visit us at: http://www.edelbrock.com
Installation and Setup
In this section, you will have access to information on how to physically install the
system in your vehicle, install the sensors and ECU, and begin the setup process to get
your vehicle on the road!
BEFORE BEGINNING!
A clean and trouble free installation of the Pro-Tuner System is greatly enhanced by
taking the time to organize and plan your installation before beginning. Perform the
following:
·
Unpack and inventory the system to ensure that you have all the parts, sensors, and
wiring that are listed on the packing list
·
Lay the harness and wiring out on a table or the floor to help visualize the placement of
the sensors, connectors and components
·
Take your battery to a local auto parts store and have them test it for proper voltage
and current carrying capacity.
·
Be sure your engine is in good mechanical condition. Fouled spark plugs, vacuum
leaks, etc. will prevent you from properly tuning your engine!
3.1
Engine Management Concepts
Visit us at: http://www.edelbrock.com
Engine Management Concepts
In this section, we will discuss the general operation of the Engine Management system,
including strategies, controls and methods used to enable the engine to be efficient,