Edelbrock 3670 User Manual - page 192
192
not capable of individual cylinder control. However, if it is used with an approved cam
sensor it can provide individual cylinder control. Discuss the cam sensor options for use
with the flying magnet trigger with your Edelbrock support expert.
Individual Cylinder Fueling Control (Pro Option Only)
The FuelMult1-4 Maps provide individual cylinder offset to optimize power and
economy. (encoded crank trigger required). For example, the fueling maps allow the
tuner to richen a cylinder that tends to run hot at a certain load and speed. It can also
lean out a cylinder that runs richer than the others at part throttle.
It's purpose is to optimize each cylinder to help overcome distribution and exhaust tuning
variations between cylinders and it increases power as well as reliability when properly
tuned.