Edelbrock 3670 User Manual - page 172
Manual is about: Edelbrock Electronic Fuel Injection System User Guide
of
235
172
5.1
Warm Up Fine Tuning
Visit us at: http://www.edelbrock.com
Warm Up Fine Tuning
Starting and Warm up calibration is done through the following screen:
The Crank IAC slide controls will set the amount of crank airflow vs. engine coolant
temperature.
The Crank Spark Advance will set the amount of spark advance during cranking. It can
be varied according to crank rpm. Start by tuning the 0-100 sliders conservatively, this
will reduce cranking loads on your starter. Adjust the other sliders as required for best
start ability. The 100 and 200 rpm sliders are most critical, as that is generally the
cranking speed range of most engines.