Fadini Hindi 880 Instruction Manual - English
APPLICATION OPTIONS DEPENDING ON GATE WIDTHS
1.0m
stroke 150
2.0m
2.5m
4.0m
stroke 280
stroke 400
with an electric lock
stroke 280
IMPORTANT:
The Gate Post and the gate Hinges
must be suitable to take the weight and
inertia effects generated during the
opening and closing operations.
= with gate wings wider than 2.0 metres each,
an electric lock is needed.
(*)
(*)
883 84 BB5
Freno A/C
Braking O/C
avec Frein O/F
Working
280mm
meccanica
FADINI
Power
Supply voltage
Absorbed current
Maximum pressure
rpm motor
IP
OIL FADINI
300W
230V - 50Hz
1,3 A
30 atm
1350
67
-25°C +80°C
www.fadini.net
made in italy
Item number, "Price list" refers
N = Non locking in Opening
B = Locking in Closed position
BB = Double locking
Bar code
locking options:
Pump type "P3 or P5"
Braking version reference
• in closing - code No. 77 -
• in opening/closing - code No. 84 -
Strokes 150mm, 280mm, 400mm
Technical data
PIC. 1
PRELIMINARY WARNINGS FOR SAFETY AND PROPER SYSTEM OPERATION
- Site inspection, installation, testing, risk analysis and after sale service/maintenance must be carried out by qualified and authorized technicians
- This automation is designed for a specific scope of applications as indicated in this manual, including safety, control and signalling accessories
as minimum required with "Fadini" equipment.
- Any applications not explicitly included in this manual may cause operation problems or damages to properties and people.
- Make sure the gate is correctly mounted and opening/closing movements are smooth, without any friction or jerking.
- Verify that the gate is perfectly levelled in the vertical position and both upper and lower hinges are well lubricated and smooth running.
- Make sure that rigid gate stops are mounted in both open and closed gate stop positions.
- Ensure that the mains and voltage supplied to the motor is 230V ±10% 50Hz.
- Hindi 880 must be powered with cables having wires with 1.5 mm
2
section, maximum distance of 50 meters. For distances longer than 50 meters,
it is recommended that wires with suitable sections in compliance with good installation requirements be used.
- In case parts or accessories are needed as replacements, use only Fadini originals as recommended by the manufacturer.
- Meccanica Fadini is not liable for damages caused by the incorrect use of the equipment, or for applications not included in this manual or for
malfunctioning resulting from the use of materials or accessories not recommended by the manufacturer.
- The manufacturer reserves the right to make changes to this manual without prior notice.
Code of brake type
English
14