Fadini Hindi 880 Instruction Manual - English
10
The electric cable for power supply
must dangle loosely during opening
and closing movements.
PIC. 3
Cut to measure. See
distance B (page 17).
GATE
Metal reinforcement plate: provide a suitable
strengthening plate (optional) to the fixing
bracket, depending on the type of gate
involved, specially with heavy gates.
PLEASE NOTE: When the front fixing is
welded, make sure to suitably protect the
shaft during this operation.
PIC. 4
IMPORTANT: with heavy gates, the installer
must properly strengthen the fixing both to
the gate post and gate with rigid metal plates
(not supplied by manufacturer), depending
on the application requirements (Pic.4).
!
Make sure the actuator is levelled in
any directions before welding.
Rear
bracket
B
Front
bracket
ELECTRICAL LAYOUT AND ACCESSORIES
Before installing Hindi 880 set up all the
safety and commanding accessories, at
least as minimum required. Pic.3.
!
1 - Flasher Miri 4 with aerial
2 -Controller Elpro 13 exp (*)
(most important: it must be kept sheltered and dry)
(*) with plug-on receiver Astro 43/2 R M.Q.B.
3 - 230V - 50Hz 0.03A magneto-thermal
differential circuit breaker
(beyond 100m use 2.5 mm
2
section wires)
4 - Photocell receiver FIT 55 recess mount
5 - HINDI 880 oil-hydraulic actuator
6 - Gate stop in closed gate position
7 -Electric lock for Hindi 880 Non-locking (**)
(**) and for gates wider than 2.0m each
8 - Photocell projector FIT 55 recess mount
9 - Gate stop in open gate position
10 - Transmitter Astro 43/2 TR Small
11 - Post fixing base plate (***)
(***) complete with base plate cover
12 - Anodized aluminium 0.5m post
13 - Key-switch CHIS 37 recess mount
14 - Anodized aluminium 1.20m post
code 4602
code 7079
code 4329
(NOT included)
code 551
(NOT included)
code 7083
code 551
(NOT included)
code 4321
code 554
code 555
code 371
code 557
FIXING GEOMETRY DEPENDING ON THE TYPE OF "ACTUATOR"
After checking the fixing dimensions as indicated on page 17 (Pic.6, Pic.7 and Pic.8), weld
the rear and front brackets to the respective patch plates (Pic.4).
!
!
14
11
4
9
9
12
8
10
1
5
5
6
13
4 x 1.0
4 x 1.0
2 x 1.0
4 x 1.0
7
2 x 1.0
2 x 1.0
4 x 1.0
4 x 1.0
3 x 2.5
2
2 x 1.0
RG 58
3
8
4
POWER SUPPLY
230V ±10% 50Hz
SINGLE-PHASE
230 VOLT
NEUTRAL
LIVE
English
16