Fantasea F400D User Manual - page 10
10
Main Trigger [Shutter]:
Depress halfway to set the focus and fully depress to activate shutter.
o Halfway depression activates auto-focusing [AF] and
automatic exposure [AE] setting shutter speed and aperture.
o Depressing completely releases the shutter and takes the
picture.
Shutter Speed and Aperture Control [Command Main Dial]:
When a creative zone is chosen, the Command Dial is used.
This is a double function button:
o Sets the shutter speed
o Sets the aperture in AV mode
o To activate aperture change in the manual mode you must
depress the Aperture Compensation Control button [13] in
back of camera and then rotate the main dial [Speed
Aperture Command Control dial--Reel #4]. Check with
Canon Instruction manual for details.
Interchangeable Port Mount:
Allows the use of different ports to match different interchangeable lenses for
creative imaging control. Carefully check that both O-rings mounted on the port
thread areas are properly seated, cleaned and lubricated prior to installing the lens
port.
Zoom Lens Control:
Operates the zoom control function: see the section called Attaching the Zoom
Control Guide Ring in the chapter "Preparation of Housing" for details on attaching
the Zoom Control Guide Ring.
Display (On/Off) / Info:
The LCD monitor can display the camera setting screen, menus screen and image, etc.
When shooting, press the button to turn the LCD display screen on/off.
In Playback mode, press the display button to switch the display format: Single
image display with/without basic info and shooting information display.