Fantasea F400D User Manual - Control Details
9
Control Details
The following is a partial list of the most common uses of housing and camera controls.
For the full list of camera functions and settings accessed by each control, you should
consult your Canon 400D camera instruction manual.
Please note that some of the Fantasea F400D housing controls are designed to operate
more than one camera control.
Flash Sync Port:
Connect the Canon 6 pin sync cord to this bulkhead connector
.
Align the index marks to correctly position cord to seat in flash port.
Push down on cord to seat the O-ring seal, and make connection with the contact
pins.
Tighten collar on sync cord to insure cord does not come loose or separates while
underwater or during use.
o A 6 pin to 5 pin adaptor cord is available for users that have
the 5 pin Nikonos type flashes.
ON/OFF / Mode Control:
Dual Function Control button:
The second feature sets the Mode Control; push down and twist to set the mode;
o Mode dial is divided into two functional zones: Basic and
Creative.
1. Basic: all you do is press the shutter button
for fully automatic shooting with a choice of
specific subject shooting modes.
2. Creative: can set camera to your specific
parameters. These modes will give you more
control over the result. See Canon 400D
instruction manual for full details.