Fantasea F400D User Manual - page 12
12
Viewfinder Eyepiece
View the image you want captured through this opening.
In order to prevent the LCD screen from being turned off automatically by
the eye sensor beneath the cameras eye piece, which senses the back door of
the housing and prevents the LCD from displaying information, it is
important to disable this function through the Menu Shooting Options
LCD auto off Disable.
Aperture/Exposure Compensation Control: Dual Control:
In the manual mode- you can set both the shutter speed and aperture. Set the Mode
Control [2] to M [manual].
o To set the shutter speed, turn the Command dial [4].
o To set the aperture, hold down the Aperture button [13] and
turn the Command dial.
In any other mode than manual- hold down the Exposure Compensation
Control button [13] and turn the main dial to make the photograph
darker/brighter.
This is for two different functions: Aperture in manual mode, and exposure
compensation control in any other mode.
Drive Mode Selection:
This button is for choosing single shooting, self timer or continuous shooting.
o Press the Drive Mode button.
o Use the arrows (left/right) to choose the drive mode.
AE-Lock/FE Lock Control/Enlarge control:
Use the AE lock when you want to take multiple shots at the same exposure setting
or when the area of focus is to be different from the exposure metering area. When
the button is pressed, you lock the exposure—then you can recompose and take the
shot.
The FE lock locks the flash exposure setting over the desired area of the subject.
o Press and Hold the AE-L/AF-L button to lock exposure and
focus prior to recomposing a scene. The original exposure
value and focus distance will remain set after re-
composition.
During image playback, press the enlarge control to magnify the image.
12
14
15
13