Fantasea F400D User Manual - page 13
13
AF Point Selection:
In the Image Zone modes, all AF points are active. Usually the AF point covering
the closest subject will be selected to focus the subject you want.
In the creative zone, you can select one AF point to focus on. Press the AF Point
Selection button, and press one of the 4 Multi Selector buttons to select an AF point.
o While looking through the viewfinder, you can also select
the AF point by turning the Command Dial button [4] until
the desired AF point flashes in red. Press the Set Control
button [18] to toggle the AF point selection between the
center AF point and the automatic AF point selected.
Four-Way Multi-Control:
This four way button offers you the following functionality in the shooting mode.
To alter one of the following, press the appropriate arrow, and use the four-way
multi control to choose the value. Press the shutter button half way when done.
o Metering Mode—left arrow
The metering mode is the method of measuring the brightness of
the subject.
o White Balance Selection—bottom arrow
White balance is for making the white areas look white instead of
having a color cast.
o ISO Speed Set—top arrow
Set the ISO speed to suit the ambient light level.
o Auto Focus—right arrow
You change the AF mode to suit different subjects:
One-Shot AF for stills and portrait.
AI Focus AF for unpredictable movement [wildlife].
AI Servo AF for sports photography.
Set Control
Set Control: the center button set in the middle of the Multi Selector Control buttons.
Used to set and confirm changes to the Multi Control Selector settings and the Menu
button.
When the Set button is pushed, you can select a "Picture Style" by pushing the top
or bottom Multi Selector buttons.
16
17
18