Fetco CBS-2131 XTS User Manual - Contact Information
2
Contact Information
Description & Features
The CBS-2130XTS Series coffee brewers feature our universal spray over technology, which works like this:
The following variables are programmed for each batch size:
Brew volume
Prewet percent (Percentage of the brew volume)
Brew time
Prewet delay (The time between prewetting and the brew cycle)
Adjustable number of pulses
Brew water low temperature lockout
Drip delay
(The time between the end of the brew cycle and the unlocking of the brew basket)
Using these variables, the software calculates how much water to use for prewetting and brewing. The total brew time
digitally divides into several cycles. Within these cycles, the software calculates how long to spray water over the coffee
grounds, and how long to pause before the next cycle begins.
Factory settings
The following are the factory set defaults—all variables in the brew menu are adjustable:
Brew Volume and coffee filter size:
CBS-2131&2132 XTS: Up to 1 gallon/3.8 liters per brew Coffee Filters: 13” X 5” FETCO Product #F002
Brew Time, all models: Factory set at 5.5 minutes=[4 minute brew time + 1.5 minute drip delay]
Temperature Control: Water temperature is factory set at 93°C/200°F
Features
Touchscreen Operation
[
XTS
: EXtractor Touch Screen]
Brew water low temperature lockout
Cascading Spray Dome-No clog sprayhead
ECO mode for tank heater energy savings
Brew mechanism is digitally adjustable
Dispenser locator under brew basket
Intuitive Control Settings for Batch sizing
Magnetic flux brew basket sensor
Infinitely variable bypass for strength adjustment
Brewbasket locks (configurable)
Four fully programmable batch sizes per side
Totalizing counters for brewer functions
User programs save-to and load-from SD cards
Optional gourmet stainless steel brewbasket
Recipe copy to SD card
Demonstration Mode for review & training
Customizable batch name
Heavier gauge stainless steel cabinet
Screen logo customizable by user from SD card
Configurable for FLOWJET® pump module
SD card firmware program and upgrade installation
SD card Backup for menu items
User selectable Universal Electrical Connection
Flexible electrical installation configuration
Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice
FETCO
®
Food Equipment Technologies Company
600 Rose Road
Lake Zurich
• IL • 60047-0429 • USA
Internet: www.fetco.com
Phone: (800) 338-2699 (US & Canada)
(847) 719-3000
Fax: (847) 719-3001
Email: sales@fetco.com
Technical Support techsupport@fetco.com