Fetco CBS-2131 XTS User Manual - Xts
6
Programming-operator access programming
-The FETCO CBS-2100XTS brewers have four brew batch menus per side.
Menus are preprogrammed by the factory with basic settings that will operate the equipment as purchased.
There are two batches each marked “Regular” and two marked “Decaf”
-Most operators prefer a full batch and half batch setting for regular and decaf or specialty coffees.
The half batch setting will need to be programmed by the operator to match the dispenser.
-
Settings are adjustable and the name of the menu can be changed. -Batch 1 cannot be disabled.
Menu screen displayed
Accessing
Programming
Menu screen displayed
Accessing
Programming menu screens
(Brewer “HOME” screen)
Turn unit “OFF”
After 10 second delay:
Turn unit “ON”
Å
“HOME" Screen on left will
appear
Immediately place finger on
screen and “HOLD”
Screen on right will appear
Æ
(Programming menu screen)
Å
Top line is programming category
Å
Second line displays items for
programming
Right and left hand arrows will scroll
to the screens that display
“
Program, General, Inputs,
Outputs and Other”
The down arrow enters the
individual programming items
shown below
Programming-category screens: Menu Tree
Programming category screens
To enter:
Turn unit “OFF”, After 10 second delay, turn unit “ON”, (Home Screen will appear),
Immediately place finger on screen and “HOLD”—“PROGRAM” Screen
(first below) will appear.
Use right/left and down arrows to travel through programming. “EXIT” saves settings
Programming Category
Programming Category
Programming Category
Programming Category
Programming Category
PROGRAM
GENERAL
INPUTS
OUTPUTS
OTHER
Items for Programming Items for Programming Items for Programming
Items for Programming Items for Programming
Batch 1 Left*
Tank Temp
Display Inputs
Show Summary
Error Codes
Batch 2 Left**
Brew At Temp
Calib Touch Scr
Left Valve
Copy Program
Batch 3 Left **
Units of Meas.
L. Bypass Valve
Upload Logo
Batch 4 Left **
ECO Mode
Right Valve
Res to Factory
Batch 1 RIGHT*
Logo Timeout
R. Bypass Valve
Counters
Batch 2 Right **
Brew B.Sensor
Fill Valve
Firmware
Batch 3 Right **
Use Flojet
Left Basket Lk
DEMO Mode
Batch 4 Right **
LLC Sensitivity
Right Basket Lk
Batch Copy
Heater
Screen
EXIT
PROGRAM
Batch 1 Left
EXIT
GENERAL
Tank Temp
EXIT
INPUTS
Display Inputs
EXIT
OUTPUTS
Show Summary
EXIT
OTHER
Error Codes
EXIT
PROGRAM
Batch 1 Left
CBS_2132 3L
Ready Touch
Heating screen
Filling to unlock
XTS
™
EXTRACTOR
TOUCHSCREEN