FRANCO UCP Instruction Manual For Use And Maintenance - page 10
FRANCO srl Manual of use and maintenance UCP
10
1.7 Applications
In the industrial field, the machine is installed in places where it is necessary to maintain a certain humidity
level, for example in fruits and vegetable refrigerating rooms, in aging warehouses, in the paper and tobacco
industries, and in the textile companies.
In agriculture the machine is used to humidify greenhouses and mushroom farms, and for disinfectant
treatments.
In the animal husbandry the machine is used to cool or nebulize in disinfectant environment or other solutions.
The materials used in building the machine ensure reliability and durability in time.
The arts of the humidifier are made in PA PC and ABS, the screws are stainless steel made.
The use of materials that do not suffer from the corrosive action of water and acids makes the UCP a machine
capable of working in almost all the environments.
The UCP combines the power of the humidification, the ease of installation, and, by operating without nozzles is
not subject to clogging by impurities and limestone.
The required water pressure is that of the water supply (between 2 and 6 atm).
This device should be used only for the functions for which it was intended
and designed: "Adiabatic Cooler – Humidifier”.
Any other use is to be considered improper and dangerous.
1.8 Versions
The adiabatic cooler / humidifier UCP is available in the following versions:
1809001
Version UCP-1 230V 50Hz Single phase
1809002
Version UCP-1 230V 60Hz Single phase
1809003
Version UCP-3 400V 50Hz Three phases + neutral
1809004
Version UCP-3 400V 60Hz Three phases + neutral
1.9 Identification and data label of the unit
Each machine is identified by the CE plate on which, indelibly set, is reference data of the device itself.
In any communication, either with the manufacturer or with the customer service, always cite these references.
Fig.1.2
The label plate positioning may vary from one device to another.