G-Tech Pro Competition User Manual - 102
102
G-TECH / Pro Competition User Guide, Release 3.1
Setting U.S. or Metric Mode
The G-tech can display units in U.S. mode (feet, pounds,
miles per hour, etc.) or Metric mode (meters, kilograms, kilo-
meters per hour, etc.).
Set the G-tech to operate in whichever mode you prefer to
view data.
Note:
When you switch between metric and U.S. modes, it
affects only how the data are displayed, not how the data are
saved inside the G-tech.
In other words, you can switch between metric and U.S. modes
at any time, without losing any configuration information or vehi-
cle measurements.
The following table lists the units for each configuration item
in the G-tech, both in U.S. mode and Metric mode:
When performing and viewing runs, there are also corre-
sponding measurements in both modes:
The G-tech measures and stores both full sets of measure-
ments on every run, regardless of which mode you are in. In
other words, even if you perform a run in U.S. mode, the G-
tech is also monitoring and storing all the metric milestones
as well, and vice versa.
Item
U.S. unit
Metric unit
Weight
lbs
kilograms
Speed
miles per hour
kilometers per hour
Distance inches, feet
cm, meters
Power
horsepower
kilowatts
Torque
ft-lbs
newton-meters
U.S. Mode Measurement
Metric Mode Measurement
60 ft time
20m time
330 ft time
100m time
1/8 mile time and speed
200m time and speed
1000 ft time
300m time
1/4 mile time and speed
400m time and speed
0-60 MPH time
0-100 km/h time
Item
U.S. unit
Metric unit