G-Tech Pro Competition User Manual - Quick Setup
Manual is about: performance meter
of
180
Quick Setup
29
G-TECH / Pro Competition User Guide, Release 3.1
29
1
Start in Configuration Mode.
2
Select “Calibration” and press
.
3
Select “Accelerometers” and press
.
4
Select “Calibrate Axes” and press
.
5
You will see the following screen:
Note: DO NOT CALIBRATE ACCELEROMETERS or ERASE ACCELEROMETER CALIBERATION
on G-tech units which were shipped after August 2003. They have already been calibrated in the
factory. Older G-techs will automatically request calibration. If you are unsure contact tech support.