G-Tech Pro Competition User Manual - Anal
Anal
yzing Runs
73
G-TECH / Pro Competition User Guide, Release 3.1
73
To view the horsepower (HP) and torque (TQ) graph for a
run, select the menu choice titled “HP & TQ vs RPM” and
press :
You will see a screen (Figure 32) that gives you a summary of
the horsepower and torque measurements for the run.
Figure 32: Horsepower / Torque summary
The G-tech calculates horsepower and torque throughout
the RPM range measured during the run and finds the peak
value for each. It displays the values, along with the vehicle
weight, on the summary screen.
Note:
Vehicle weight is displayed because the G-tech uses
vehicle weight in the horsepower calculation. If you accidentally
entered the wrong weight, the calculated horsepower will be off.
Refer to “Horsepower, Torque & G-tech” on page 157 for more
information on vehicle weight and horsepower/torque calcula-
tions.
To proceed to the HP & TQ vs RPM graph, press
again.
You will see a graph such the one shown in Figure 33. Of
course the shape of the curve, as well as the numbers and
ranges, will be different for your vehicle.
Figure 33: Graph of Horsepower & Torque vs RPMs
Horsepower Cursor
Peak Horsepower Marker (+)
RPM value
at cursor
HP &
TQ
RPMs
Torque Cursor
Peak Torque
Marker (+)
Torque
value at
cursor
Horsepower
value at
cursor