G-Tech Pro Competition User Manual - Note:
76
G-TECH / Pro Competition User Guide, Release 3.1
To view the RPM vs. time graph for a run, select the menu
choice titled “RPM vs time” and press
:
In order to give you the feel and excitement of the run, the
RPMs are replayed in real-time, just as they were happening
during the run. This means that if you did a 15-second run, it
will take 15 seconds to draw the RPM plot. During RPM
replay, the G-tech illuminates an LED at any point where the
shiftlights were on during the run.
Note:
To finish the replay quickly, rather than in real-time,
simply press the
button while it is being drawn.
Once the graph is fully drawn, you will see a graph such the
one shown in Figure 35.
Note:
Your graph will look different due to your driving style
and vehicle.
Figure 35: Graph of RPMs vs Time
On this graph,
and
move the cursor along the RPM
curve.
As the cursor moves, the RPM value and timestamp value
adjust to reflect the values at the cursor position.
Each tic mark on the horizontal axis represents 1 second.
Each tic mark on the vertical axis represents 1000 RPM.
Cursor (current position)
RPMs
Time
Both
change as
cursor
moves
60ft. mark
Milestone
Region