G-Tech Pro Competition User Manual - page 35
Manual is about: performance meter
of
180
34
G-TECH / Pro Competition User Guide, Release 3.1
15
Tilt the G-tech back as shown, so the ball rests in
the box. The G-tech will automatically advance to
the next calibration step when you have accom-
plished this.
16
Re-orient the G-tech as shown and press
.
17
The following instruction screen will appear. Read it
and then press
.
Note: DO NOT CALIBRATE ACCELEROMETERS or ERASE ACCELEROMETER CALIBERATION
on G-tech units which were shipped after August 2003. They have already been calibrated in the
factory. Older G-techs will automatically request calibration. If you are unsure contact tech support.