G-Tech Pro Competition User Manual - Note:

52

G-TECH / Pro Competition User Guide, Release 3.1

Measuring Your Runs

To perform a timed measurement of your vehicle’s straight-

line acceleration, the G-tech has a special display called the 

Run Window.

You will use the Run Window to make measurements such 

as:

•

1/4 mile E.T. and speed

•

0-60 MPH measurements

•

braking distance measurements

•

horsepower and torque measurements

To get to the Run Window:

•

Make sure that the G-tech is in Drag Strip Mode, dis-

playing the tachometer on the G-Window

•

Press 

You will initially see the Staging Screen as shown in Figure 14.

.

Figure 14: Staging Screen

Note:

If your G-tech does not look like Figure 14, that 

means it is configured to use the reaction time light tree. Please 

refer to “Reaction Time / Start Mode” on page 128 for informa-

tion on disabling the reaction time light tree.

At this point, the G-tech is making sure that the vehicle is 

completely stopped. This process takes about 1 second, and 

is called “staging” in this manual.

After about 1 second, the Upper Left LED will begin blinking, 

and the screen will appear as in Figure 15. At this point, the 

G-tech is ready for you to perform an acceleration run.