Gakken Stirling engine Assemble And Operating Instructions - page 6
D1
control lever
D2
propeller lever
D3
motor
3
Figure ー
Attach the D2
propeller lever to the
D1 control lever.
10
One 9mm
across spacer
Two 7mm
bushes
Two 7mm
across washers
Two 8mm
across washers
Two 6mm
large nuts
Two 9mm
springs
D4
gear
D4
gear
nut (large 6mm)
washer
(7mm in diameter)
spring
(9mm)
washer
(8mm in diameter)
D2
D1
bush
(7mm)
cross section of the control
lever and the propeller lever
2
2 is engraved
on the back.
nut (large 6mm)
washer (7mm in diameter)
spring (9mm)
washer (8mm in diameter)
bush (7mm)
D1
control lever
11
Figure ー
Attach the motor to
the screw at the D1
control lever.
11
Attach the motor.
washer
(7mm in diameter)
washer
(8mm in diameter)
bush (7mm)
spacer
(9mm in diameter)
spring (9mm)
nut
(large 6mm)
nut
(large 6mm)
washer
(7mm in diameter)
washer
(8mm in diameter)
bush
(7mm)
spacer
(9mm in diameter)
D1
D3
spring
(9mm)
cross section of the control
lever and the motor
1 is engraved
on the back.
3 is engraved
on the back.
2 is engraved on
the back.
nut (large 6mm)
washer (7mm in diameter)
spring (9mm)
washer
(8mm in diameter)
bush
(7mm)
spacer
(9mm in diameter)
D1
control lever
D3
motor
10
Attach the propeller lever to the control lever.
D2
propeller lever
Put it on from the
top vertically and
turn little by little.
How to use the
wrench here
D1
control lever
D2
propeller lever
D3
motor
※Check the size with this.
Full-scale
4
Assembling the Lever Part
D
13
Figure ー
Put E1 glass cylinder
in the E2 radiator.
(Put in the glass
cylinder as deep as
possible.)
13
Assemble the glass cylinder.
12
Figure ー
Push the D4 gear on
the motor assembled
at Figure ー .
12
11
Attach the gear
to the motor.
E7
displacer
E1
glass cylinder
E2
radiator
E8
propeller
E3
displacer holder
E4
main piston
E5
connecting rod
E6
displacer adjuster
Four 5mm
small nuts
Two 7mm
washers
E1
glass cylinder
E2
radiator
※Check the length
of screws with
this diagram.
Two 6mm screws
Insert deep enough
until this part is caught
in the radiator.
cross section
of the glass cylinder
5
Assembling the Piston Part
E
E1
E2
Warning ★ Fire is used for the experiment. Use great caution to avoid
a burn and fire. Do not let a 15 or less-year-old child experiment alone.
※ There may be more screws, washers, nuts
and bushes than actually used for spare.
PARTS
Parts to be used
※ There may be more screws, washers, nuts
and bushes than actually used for spare.
PARTS
Parts to be used
10
11