Ganz ZN-DT1A User Manual - page 23
Manual is about: H.264 Network Camera PixelPRO Series
of
41
9. FTP
9.1 Configuration
Server Configuration
Enable / Disable the FTP function to download saved content from the SD Card remotely.
When it is Enabled, the FTP client can download the saved content without removing the SD Card.
Client Configuration
Allows transmission of still images to remote sites, using the FTP server. Set the information for FTP
transmission by inserting the IP address, Username and Password of the remote FTP Server.
NOTE: This function cannot be used when Installation mode is turned ON. Set the first stream to
1280x720 or 1280x720(wide) in the Video > Codec section, and second stream to MJPEG or ‘None’.
9.2 Event