Ganz ZN-DT1A User Manual - page 26
10.2 Motion
Motion Detection
Motion detection is used to generate an alarm whenever movement occurs within the video image.
A total of 4 motion detection zones can be configured.
Configuring Motion Detection
1. Click
Motion Detection in the Event Config menu.
2. Click ‘Add Window’, and select an area for motion detection by checking the relevant box.
3. Enter a descriptive name for the detection zone you are creating.
4. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and
drag to the desired position) of the motion detection zone you are creating.
5. Adjust the Object size, History and Sensitivity profile sliders.
Any detected motion will be indicated by red peaks in the Activity window.
6. Click
Save.
NOTE: Using the motion detection feature will consume more of the cameras resources, and this
could decrease the camera’s overall performance, depending on your settings.