Ganz ZN-DT1A User Manual - page 9
2.4 Adjusting the Image and Focus (cont’d)
ZN-DT1M, ZN-DT2M (MFZ Lens)
1. Open the Live View page in your web browser.
- Select the Setup tab, and open the Video -> Camera page.
- Click ‘Lens Adjustment’.
2. Set the desired Zoom position.
- Wait a few seconds, as the camera unit will attempt to automatically adjust the focus.
3. If the focus has not adjusted properly, click the ‘Focus Position Search’ button.
NOTE: DC Auto-Iris should always be disabled while focusing the camera. This will set the iris to
the wide open position, which yields the smallest depth of field, and thus the best conditions for
focusing the lens. When the focus has been set by using this method, it will maintain its focus in
any kind of lighting conditions.