Ganz ZN-DT1A User Manual - page 36

Time Zone Setup   

You may select your time zone from the drop-down list.   

D.S.T (Daylight Saving Time) 

    Toggle automatic DST clock adjustment on/off. 

12.3  Maintenance  

System Name 

    Choose a system name to identify the camera when using e-mail notifications. 

System Reboot   

Reboots the camera. 

Factory Default   

    To reset the camera back to the original factory default settings.   

Save User Data   

    System settings can be saved to a PC.   

Load User Data 

The system settings can be reloaded in case of accidental factory reset or can be transferred to   

another camera if multiple units need to be installed with the same settings.   

Firmware Update   

From time to time, CBC will release firmware updated for the PixelPro Series camera, which will   

contain feature additions and other improvements. Always read the upgrade instructions and   

release notes that accompany each new firmware release, before updating the firmware.   

NOTE:

Preconfigured and customized settings should be saved before the firmware is upgraded.