Ganz ZR-DHC1630NP Instruction Manual - page 43
Other manuals for ZR-DHC1630NP:
Gms Manual
of
123
43
43
PTZ setup
PTZ setup
2. Click on the button to select
“Use”
PTZ
3. If you choose “use”, the
“Setting”
button will be activated.
4. Click on the
“Setting”
button. The display will appear as follows. .
1. Select the camera number for which you wish to set up PTZ control.
The DVR system can connect with any PTZ, speed dome or Rx receiver and control the devices
remotely via our software. To use this function, connect the device to the RS485 port on the DVR
and set up the address and settings of the remote device.