Ganz ZR-DHC1630NP Instruction Manual - 3.7
86
86
3.7.1 Keypad
3.7.1 Keypad
Input DVR, PTZ and external monitor information for control through a Keypad device.
DVR ID
: Select DVR ID (DVR 1~DVR 100) to be identified on Keypad.
Keypad ID
: Select Keypad ID (Keypad1 ~ Keypad4) accessible to DVR.
Keypad Setup
:Input keypad details for controlling the DVR or external monitor.
Keypad Name
: Enter the name of location where the Keypad is installed.
Use
:Select the enable or disable the Keypad.
Keypad Control
: Select if you want to control “DVR” or “External Monitor” by Keypad.
Keypad Model
: Select the Keypad protocol of the installed Keypad.
Speed
: Select the Keypad speed(2400~115200 Bps).
Address
: Enter the Keypad address(0~255).
Port
: Select the port number connected to the Keypad.
Mode
: Select the port mode connected to the Keypad.
Parity
: Set bit (None, Odd Even, Space) to prevent fatal error.
Data Bit
: Set data bit 4, 5, 6, 7 or 8.
Stop Bit
: Set data bit 1, 1.5 or 2.
Default
: Click on the
“Default”
button to the default settings.
1
2
3
3.7
3.7
AddOn
AddOn
3
1
2