Ganz ZR-DHC1630NP Instruction Manual - page 59
59
59
Linked Camera
: Link cameras to record upon motion detection in another camera, multiple cameras
can be selected to be linked via motion.
Linked Alarm-Out
: Link alarm-outs to trigger on motion detected in a camera, multiple alarms can be
linked via motion
9
10
Time Zone Setting
Time Zone Setting
1
6
4
Schedule Mode
: Select the schedule Mode (Weekday, Saturday, Holiday)
Weekday
: Setup timeline for the weekday schedule
Saturday
: Setup timeline for the Saturday schedule
Holiday
: Setup timeline for the Holiday schedule
Area
: Select the area mode, there are 5 area modes for each schedule mode
Area1 ~ Area4
: Select a preset area mode to add
All
: The Area All option is the default mode on the timeline when no other area (1-4) are used.
Time Zone
: For selected area input the time period for operation.
Clear
: For the select the Area(Area1~4) the “Clear” button removes the area setup from the
timeline.
Set
: Once the area and time zone are selected click the “Set” button to apply the setting, the setting
will then be shown on the timeline.
Timeline
: Displays the timeline for the selected schedule mode.
1
2
3
4
5
6
2
3
5
[Note]
•Each area mode cannot be selected twice on the same schedule also area
modes cannot overlap each other.