Ganz ZR-DHC1630NP Instruction Manual - page 87

87

87

3.7.2 POS

3.7.2 POS

This function allows the DVR to record the image and sales information at selling point  by 

communication with a POS device.

POS Setting

: 

Name

: Input the location name of the POS installation.

Select POS ID

:  Select the POS ID connected to the DVR

Linked Camera

: Select the channel number of the camera to record POS data.

Select POS format

: Select the type of POS format which was installed.

Port/Device

: Set up of POS device so that it can communicate to the DVR.

Port Number

: Select the port number connected to the POS.

Interface Mode

: Select the Interface mode connected to the POS.

Baud Rate

: Select the POS speed(2400~115200 BPS).

Parity

: Set bit (None, Odd Even, Space) to prevent fatal error.

Data Bits

: Set data bit 4, 5, 6, 7 or 8.

Stop Bits

: Set data bit 1, 1.5 or 2.

OSD

: 

Display OSD

: Select whether or not to display POS information on screen.  

Display Time

: Set up the time to display information on the screen after the barcode has finished 

scanning products for one client or when “Enter key” is activated. If the DVR gets the information 

about next product, the information displayed on window unrelated to display time is deleted and 

then next product information is displayed.

Display Cam

: Select the channel(s) of camera to display POS data.

Available POS Device

:  Select to add, update and delete POS device currently linked to the DVR

Add :  Add new POS device to the list.

Update : Revise the setting of an existing POS device and click “Update” button.

Del : Select a POS device and click delete to remove from the list.

Transaction  Wait

:

Wait Time

: Set up the time for waiting whilst the barcode has stopped scanning 

momentarily

products for one client. If the DVR cannot get product information or the “Enter button” is not 

inputted during the setting time, the inputted product information is deleted.  

1

2

2

4

1

3

5

6

3

4

5