Ganz ZR-DHC1630NP Instruction Manual - page 62
62
62
3.3.4 E
3.3.4 E
-
-
Send an e-mail to single or multiple accounts when an emergency occurs set by motion,
video loss and alarm input.
Mail list name
: Enter name of who will be added to the mail list.
Mail setup
: Enter receiver, CC and the subject.
Receiver
: Enter receiver’s mail address.
CC
: Enter CC’s mail address.
Subject
: Enter the subject of the message.
Mail server setup
: Enter information of server name, Mail address. ID, Password etc.
Sender name
: Enter the address for the sender name.
Mail address
: Enter the mail address of the sender.
Server (SMTP)
: Enter server address of the sender.
Server Authentication
: If the server uses password identification to access the mail address.
ID
: Enter the ID for SMTP.
Password
: Enter the password for SMTP.
Notification Item
: Select the notification item, either “emergency” or “event”. Select the channel to send
e-mail notifications when event, Motion detection, Object watch, Video loss or Alarm In, has occurred.
Mail address manage
: Here you can manage e-mail groups.
Mail list
: The mail list can be added, updated or deleted.
Add
: Add list to the mail list.
Update
: Edit the information of an account in the mail list.
Delete
: Delete item from the mail list.
1
2
3
4
5
6
1
2
3
4
5
6