Garador Garamatic 10 Instructions For Fitting, Operating And Maintenance - page 5
TR10A108 RE / 05.2012
5
Check for smooth running
Use protective gloves
Factory setting
7-segment display
Display illuminated
Display flashes slowly.
Display flashes rapidly.
Dot flashes
Abbreviations used
1.5
Colour code for cables, single conductors and
components
The abbreviations of the colours for identifying the cables,
conductors and components comply with the international
colour code according to IEC 757:
WH
White
BN
Brown
GN
Green
YE
Yellow
Article designations
HE 3 BiSecur 3-channel receiver
IT 1b
Internal push button with illuminated impulse
button
IT 3b / PB 3
Internal push button with illuminated impulse
button, additional buttons for light on/off and
operator on/off
EL 101 /
EL 301
One-way photocell
STK
Wicket door contact
SKS
Activating kit for closing edge safety device
VL
Activating kit for leading photocell
HS 5 BiSecur Hand transmitter with status feedback
HOR 1
Option relay
UAP 1
Universal adapter print
HNA 18
Emergency battery
SLK
Yellow LED warning light
2
Safety Instructions
ATTENTION:
IMPORTANT SAFETY INSTRUCTIONS. FOR THE SAFETY OF
PERSONS, IT IS IMPORTANT TO COMPLY WITH THE
FOLLOWING INSTRUCTIONS. THESE INSTRUCTIONS MUST
BE KEPT.
2.1 Intended
use
The garage door operator is intended for impulse operation of
spring compensated sectional and up-and-over doors, as well
as counterbalanced retractable up-and-over doors.
Depending on the type of operator, the operator can be used
in private/non-commercial areas or in commercial areas (e.g. in
underground and collective garages).
Note the manufacturer's specifications regarding the door and
operator combination. Potential hazards as outlined in
DIN EN 13241-1 are avoided by the construction and fitting
according to our guidelines. Door systems that are located in
a public area and which only have one protective device, such
as a power limit, may only be operated under supervision.
The garage door operator is designed for operation in dry
areas.
Non-intended use
2.2
The operator must not be used with doors without a safety
catch.
Fitter qualification
2.3
Only correct fitting and maintenance in compliance with the
instructions by a competent/specialist company or a
competent/qualified person ensures safe and flawless
operation of the system. According to EN 12635, a specialist
is a person with suitable training, specialist knowledge and
practical experience sufficient to correctly and safely fit, test
and maintain a door system.
Safety instructions for fitting, maintenance,
2.4
repairs and disassembly of the door system
DANGER
Compensating springs are under high tension
See warning in section
▶
3.1
WARNING
Danger of injury due to unexpected door travel
See warning in section
▶
11
Fitting, maintenance, repairs and disassembly of the door
system and garage door operator must be performed by
a specialist.
In the event of a failure of the garage door operator, a
▶
specialist must be commissioned immediately to perform
an inspection or carry out repairs.
ENGLISH
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk