Gardena 8885 Operating Instructions Manual - 6. Putting Into Storage
q
ß
7a
ß
8a
Cutting with the Telescopic Swivel Handle:
1. Attach the Telescopic Swivel Handle.
2. Loosen the adjusting bolt
q
.
3. Set the handle to the correct length and tighten the adjusting
bolt
q
.
4. Disengage the starting lockout
ß
7a
by pushing it forwards and
press the ON button
ß
8a
.
5. Release the starting lockout
ß
7a
again.
Change Shears Set of
Blades:
r
e
t
w
Please only use original GARDENA Accu Shears Cutting
Blades.
• Grass+Boxwood-Blade Set cutting width 8 cm
Art. 2340
• Shrub-Blade Set
cutting length 12.5 cm Art. 2342
• Shrub Blade Set
cutting length 18 cm
Art. 2343
1. Press both lock buttons
w
at the same time, flip up shear
blade set
e
and remove.
2. If necessary clean transmission chamber and lubricate gear
wheels with some acid-free grease (Vaseline).
3. Place the shear blade set
e
with the snap-in lug
r
into
the groove
t
and snap shut until both lock buttons
w
have
audibly engaged.
4. If necessary, spray the shear blades with Cleaning Spray
Art. 2366. This increases the running time.
When first switching on after changing the blade set, there can be
an audible click when the cam engages with the the shear blade
connecting link.
6. Putting into Storage
Storage / Overwintering:
Store your Accu Shears out of the reach of children.
1. Charge battery. This increases the life of the battery.
2. Clean Accu Shears and shear blade with GARDENA Cleaning
Spray
Art. 2366 (see 7. Maintenance).
3. Slide blade protection onto the shear blade.
4. Store Shears in a cool, dry place where they are protected from
frost.
Disposal:
(in accordance with
RL 2012/19/EU)
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
17
GB