Garmin Apollo CNX80 Installation Manaul - page 148
Appendix B - Serial Interface Specifications
B-12
560-0982-01 Rev L
GNS 480 (CNX80) Installation Manual
B.2.1.3
Flight Plan Waypoint Type Data
The following data is only transmitted when preceded by flight plan data. There is one character per flight
plan waypoint transmitted.
Table B-9. Flight Plan Waypoint Type
Id
Item Format
Len Description
t
nnn…
1-21
n = { a (airport) ||
v (VOR) ||
n (NDB) ||
i (intersection) ||
u (user) ||
p (parallel track) ||
d (direct to) ||
F (FAF) ||
E (DME) ||
I (IAF) ||
H (MAHP) ||
M (MAP) ||
A (IFAF) ||
P (undefined approach waypoint type) }
Example Moving Map Data Output
AN 34 1570
34
°15.70’ latitude
BW 118 4390
118
°43.90’ longitude
C306
306
° track angle
D210
210 knots
E02682
268.2nm to waypoint
GR0006
0.6nm right of course
I3059
305.9
° desired track
KSFO
SFO waypoint ident
L3058
305.8
° bearing to waypoint
QE140
14.0
° east magnetic variation
T---------
No alarms, data not flagged
data> From Table B-7 a—---F Approach Enabled Off, Active Off, Message On, Parallel Track Off, Hold Off, and From/To is FROM cvR001 CDI Valid, Needle Right, Deflection 001 ° p+0008 Pressure Altitude, +80 ft vC000 VDI Valid, Needle Centered, Deflection is 000 ° data> From Table B-7 tda Flight Plan Waypoint Type data, direct-to, airport type Figure B-3. Moving Map Data Output