Garmin Apollo CNX80 Installation Manaul - page 154
Appendix C - Equipment Compatibility
C-2
560-0982-01 Rev L
GNS 480(CNX80) Installation Manual
C.2
F
UEL
/A
IR
D
ATA
C
OMPUTERS
The following fuel/air data computers are compatible with the GNS 480. Other fuel/air data sources may
be used provided they meet the serial specifications defined in B.1.2.
NOTE
Not all models listed in the following table are approved for use as an altitude source for
transponders. When configuring the GNS 480 to provide altitude data to a transponder,
only devices approved in accordance with 14 CFR 91.217 may be used.
Manufacturer Model
Data
Format
Notes
Insight TAS1000,
Truflow 500
RS-232
JP Instruments
FS-450
RS-232
Fuel data only
JP Instruments
EDM-700/800 RS-232
Fuel Flow option (Fuel data only)
Logic PEF10
PEF12
PEF20
RS-232
Pilatus PC-12 (Fuel data only)
Shadin F/ADC-200
F/ADC-2000
DigiData
RS-232
[1]
Shadin Digiflo-L
Miniflo-L
Microflo-L
RS-232
Fuel data only
[1] If it is desired to have the F/ADC calculate wind data, ground speed and track angle must be provided to the
FADC using a GNS 480 MAPCOM RS-232 output. If the MAPCOM data is not supplied to the FADC, the
GNS 480 will calculate wind data using other data supplied by the FADC.