Garmin Apollo CNX80 Installation Manaul - page 43
Other manuals for Apollo CNX80:
Pilot's Manual, Data List, Quick Reference Manual, Supplemental Flight Manual, Supplemental Flight Manual, Installation Manual, Installation Manual, Pilot's Manual
of
200
Installation Procedures
GNS 480 (CNX80) Installation Manual
560-0982-01 Rev L
2-11
NOTE
The washer must be installed with the smooth (rounded) surface facing the RF connector;
otherwise, the RF connectors may bind when the screws are tightened. To further reduce
the chances of binding, ensure that the mounting flange on each RF connector is straight
prior to installation (when viewed from the long side of the connector). Straighten the
flanges if they are observed to be bowed.
Refer to Section 2.7 Electrical Connections for details about how to wire the connectors.