Garmin GPS 400 Quick Reference - page 7
Viewing Airport Information
1. From any page, press and hold
c
to select the default NAV page. (You
may skip this step if you are already
viewing any of the main GPS pages.)
2. Rotate the large right knob (
d
) to
select the WPT page group. WPT
will appear in the lower right corner of
the screen.
3. Rotate the small right knob (
a
) to select the desired WPT page. Airport information
is displayed on the first six WPT pages: airport location, airport runway, airport fre-
quency, airport approach, airport arrival and airport departure.
4. Press the small right knob (
r
) to activate the cursor.
5. Use the small (
a
) and large (
d
) right knobs to enter the identifier of the desired airport.
6. Once the identifier is entered, the information for that airport will appear on the page.
Press
E
to accept the selected identifier.
7. To view the other airport information pages, press the small right knob (
r
) to remove
the flashing cursor and rotate the small right knob (
a
) to select the desired page.
Viewing Airport Information by Facility Name or City
1. Select the airport location page.
(See page 5.)
2. Press the small right knob (
r
) to
activate the cursor.
3. Rotate the large right knob (
d
) to
highlight the facility name (second
line) or the city (third line) field.
4. Use the small (
a
) and large (
d
) right knobs to enter the facility name or city loca-
tion of the desired destination waypoint. As you spell the facility name or city, the
GPS 400s SpellNFind feature will select the first entry in the database based upon
the characters you have entered up to that point.
5. Once the identifier is entered, the information for that airport will appear on the page.
Press
E
to accept the selected identifier.
6. To view the other airport information pages, press the small right knob (
r
) to remove
the flashing cursor and rotate the small right knob (
a
) to select the desired page.
7
Airport Information
400QR.qxd 9/12/00 11:01 AM Page 7