Garmin Rino 120 Quick Start Manual - page 12
11
Sending a
location
Quick Start
You can send any location that you have available
in your “‘Find ‘N’ Go’” menu. These may be waypoints,
contacts, cities, exits or any other data they you may have
loaded in the unit. Below as an example are the step to
send a waypoint. To send a location from a different ‘Find
‘N’ Go’ list, just select the list and use the same basic steps
as below.
To send a location (waypoint):
1. Press the CLICK STICK IN and hold it until the
Shortcuts Menu is displayed.
2. Highlight “‘Find ‘N’ Go’” and press the CLICK
STICK IN.
3. Highlight ‘Waypoints’ and press the CLICK STICK
IN.
4. Select ‘Nearest’ and press the CLICK STICK IN.
5. Highlight the waypoint that you want to send and
press the CLICK STICK IN. This will display the
Waypoint Review page.
6. Highlight the Options Button at the top right of the
display and press the CLICK STICK IN.
7. Select ‘Send Location’ and press the CLICK STICK
IN.
The waypoint location will be sent to all Rinos that are
listening. They can then choose to ‘Goto’ that location,
letting everyone meet at that location.
That about covers the basic operation of your new
Rino. If you have further questions or just want to learn
more about the operation of Rino, please refer to the Refer-
ence Manual. The Reference Manual will provide detailed
information about all of your Rino’s features.
Thanks again for choosing GARMIN!
‘Find ‘N’ Go’ Menu
Sending a Location
190-00259-01_0B.indd 11
9/19/2002, 3:15:50 PM