Garmin Rino 120 Quick Start Manual - page 5
4
Quick Start
Display Backlighting and Contrast Set Up
If lighting conditions make it hard for you to see the
display screen, you can adjust the contrast or turn on the
backlight.
To turn on the backlighting:
1. Briefly press and release the POWER button from
any page on the unit to display the Backlight and
Contrast adjustment. Press either the POWER
button or Up or Down on the CLICK STICK to turn
the Backlight either On or Off. The backlight will
remain on until the set timeout period is completed
or the POWER button is pressed again.
The unit is factory set to timeout 15 seconds after
the last button press. A light bulb symbol will
appear on the top Status Bar when the backlight is
On.
To adjust the screen contrast:
1. Briefly press and release the POWER button from
any page on the unit to display the Backlight and
Contrast adjustment. Move the CLICK STICK to Left
(Lighter) or Right (Darker) to adjust the contrast.
Backlighting
and
Contrast
Backlight/Contrast
Adjustment Window
Backlight On/Off
Contrast Adjustment
Backlight ‘On’ symbol
190-00259-01_0B.indd 4
9/19/2002, 3:15:44 PM