Garmin Rino 120 Quick Start Manual - page 7
6
Quick Start
Entering data and changing unit settings
There will be many times that you will need to enter
data in the Rino or make changes to the unit settings. Let’s
practice by entering a user ID (My ID) and changing the
user symbol. The ID and symbol are used to identify you to
other Rino users.
Changing the name:
1. Using the CLICK STICK, highlight the ‘My ID’ field
and then press the CLICK STICK IN. This will activate
the field and display the keyboard.
2. Move the CLICK STICK Up, Down, Left or Right to
highlight the ‘Clear’ field, then press IN on the CLICK
STICK to clear the default ‘Name’ ID.
3. To enter a new ID, press the CLICK STICK Up, Down,
Left or Right to move the cursor to the desired letter,
number or a space, then press IN on the CLICK
STICK to select that highlighted character. You may
enter up to 10 characters for your ID.
You will also see a highlight cursor in the ‘My ID’
field showing your current entry position in that field.
Choosing ‘Back’ will delete the character to the left
of the cursor. Use the left or right arrow symbols to
move the highlight in the ID field.
4. When you have entered your new ID, use the CLICK
STICK to highlight ‘OK’ and then press IN on the
CLICK STICK.
Changing the user symbol:
1. Using the CLICK STICK, highlight the face symbol
to the right of the ‘My ID’ field and then press the
CLICK STICK IN. This will show a list of available
face icons.
2. Move the CLICK STICK Up or Down to scroll
through the selections. Since not all the selections
can fit in the window, you will see a slider bar on the
right side indicating your current position in the list.
3. Once you have highlighted the desired icon, press IN
on the CLICK STICK.
You should now be able to display any main page,
display any options that may be available, change a setting
and enter data.
Data entry using
keyboard.
If you hold the CLICK STICK
Up or Down, you will scroll
through the list more quickly.
Once you reach the end of the
list, you can ‘wrap’ back to
the top or bottom by releas-
ing the CLICK STICK then
pressing in the same direction
again. This same method may
also be used on other selection
windows.
)
‘My’ ID’ fi eld
Symbol fi eld
Highlight Cursor
Entering Data
190-00259-01_0B.indd 6
9/19/2002, 3:15:46 PM