Hahnel modus 600rt Instruction Manual - page 14
GB
GB
26
Modus 600RT
Modus 600RT
27
Multiple Master Unit
You can use two or more cameras with master flash units on each to
change camera shooting while keeping the same lighting setup (slave
units) in wirelesss flash photography.
• Second Curtain Sync - is only enabled when using the Viper TTL
Transmitter
M: Wireless Flash Shooting with Manual
Flash
This describes wireless using manual flash. You can shoot with a
different flash output setting for each slave unit (firing group). Set all
parameters on the master unit.
1. Settingthemanualflash
mode to
• Press Function Button 4
<
Gr
>
to choose the
group
• Then press Function Button
3
<
MODE
>
to set the
2. Settingmanualflashoutput
power
• Press Function Button 2 <
>
. Turn the Select
Dial to adjust the flash output
of the group
• Press
confirm
3. Setting individual group flash
output power
4. Each group M (Master
speedlight) / A / B / C can be
set individually to different
power level
• Set any group to <---> to turn
of the power of this group
1. Setting
stroboscopicflash
• On the Master Speedlight
press
is displayed
• Turn the Select Dial to adjust
the flash output power. Press
to confirm
2. Turning ON/OFF group
M (master speedlight) / A
/ B / C
• Press Function Button 3
<
Gr
>
. Then turn the
Select Dial to set the group
ON/OFF
MULTI: Wireless shooting with Multi repeat-
ingflashstroboscopic
• Press Function Button 3
<
Gr
>
again to select
the next group. Press
button
to confirm
3. Setting the stroboscopic
flashparameters
• Press Function Button
4
<
MENU1
>
. This will
display
<
MENU2
>
which
enables selecting of power <
>
, number flashes
<
Times
>
and frequency
<
Hz
>
• Press <
>
or
<
Times
>
or
<
Hz
>
to
adjust the relevant setting
1. Set master Unit
• Press the
<
MODE
>
button and set the flash
mode to
<
MASTER
>
.
See Page 22
2. Setthefiringgroupofthe
slave units
• Operate and set the slave
units one by one
• Press Function Button
<
Gr
>
to assign the
speedlight to group ,
or
3. Settheflashmodes
• Set the flash mode of each
firing group by the operation
of the master speedlight. See
Page 22
4. Settheflashoutput
andflashexposure
compensation amount
• While a firing group is
selected, press Function
M/A/B/C:Wirelessflashshootingwith
differentflashmodesforeachgoup
You can shoot with different flash modes set for each firing group
(M/A/B/C). The flash modes that can be set are TTL auto flash / manual
/ OFF. When the flash mode is in TTL exposure is controlled to result in
standard exposure for the main subject as a single group. This function
is for advanced user who are very knowledgeable and experienced in
lighting.
B
A
C
MASTER
SLAVE
SLAVE
SLAVE