Hahnel modus 600rt Instruction Manual - page 9
GB
GB
16
Modus 600RT
Modus 600RT
17
FlashMode-TTLAutoflash
This flash has three flash modes: TTL, Manual (M), and MULTI
(Stroboscopic). In TTL mode, the camera and the flash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available: FEC,
FEB, FEL, HSS,
second curtain sync, modeling flash. These can be
controlled with the Modus 600RT or with the camera’s menu screen.
* Press < MODE > Mode Selection Button and three flash modes will display on the
LCD panel one by one with each pressing.
TTL Mode
Press < MODE > Mode Selection Button to enter TTL mode. The LCD
panel will display TTL.
• Press the camera release button halfway to focus. The aperture and
effective flash range will be displayed in the LCD panel.
• When the shutter button is fully pressed, the flash will fire a preflash
which the camera will use to calculate the correct flash output power
the instant before the photo is taken.
FEC: Flash Exposure Compensation
With FEC function, you can adjust the calculated level from -3 to +3
in 1/3 stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the lighting environment
Setting FEC:
1. Press Function Button
2
<
>. The icon <
> and flash exposure
compensation amount will be
highlighted on the LCD panel.
2. Set the flash exposure
compensation amount.
• Turn the Select Dial to set
the amount.
• “0.3”means 1/3 step,
“0.7”means 2/3 step.
• To cancel the flash exposure
compensation, set the
amount to “+0”.
SET
3. Press < SET > button again
to confirm the setting.
FEB: Flash Exposure Bracketing
The Flash Exposure Bracketing can be set from your camera. Please
refer to the Camera instruction manual for further details
FV Lock: Flash Value Lock
The Flash Value Lock can be enabled from the camera. Please refer to
the Camera instruction manual for further details
High-Speed Sync
High Speed Sync (HSS) enables the flash to synchronize with all
camera shutter speeds. This is convenient when you want to use
aperture priority for fill-flash portraits.
1. Press Function Button 4
<
> to turn ON the
High Speed Sync. The icon
<
> will be displayed
Second-Curtain Sync
The Second curtain sync (Rear curtain sync) can be enabled from the
camera. Please refer to camera instruction manual for further details.
• When rear curtain sync is enabled it will not be displayed on the modus
600RT speedlight. See LCD on camera.
• With high-speed sync, the faster the shutter speed, the shorter the
effective range
• To return to normal flash, press <
> button twice
• MULTI Flash mode cannot be set in high-speed sync mode
• Over-temperature protection may be activated after 15 consecutive
high-speed flashes
Flash Mode - Manual Flash
The flash output is adjustable from 1/1 full power to 1/128th power in
1/3rd stop increments. To obtain a correct flash exposure, use a hand-
held flash meter to determine the required flash output.