- DL manuals
- Haier
- Other
- H2SM- - annexe 25
- Manual
Haier H2SM- - annexe 25 Manual
Summary of H2SM- - annexe 25
Page 1
Air conditioner edition:2005/11/18 operration.
Page 2
Air conditioner before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require speciali- zed waste...
Page 3
Air conditioner for the purpose of the safety,the air con- ditioner must be properly grounded in acco- rdance with specifications. Always remember to unplug the air conditioner before openning inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pu...
Page 4
Air conditioner indoor unit parts and functions outdoor unit inlet grille air filter vertical flap use remote controller to adjust up and down air flow. (don't adjust it manually.) power indicator lights up when unit starts. Timer mode indicator lights up when timer operation is selected. Operation ...
Page 5
Air conditioner parts and functions cooling indoor maximum:d.B/w.B 32 o c/23 o c 24 o c/18 o c -7 o c/-8 o c 43 o c/26 o c 18 o c 27 o c 15 o c 18 o c/14 o c maximum:d.B/w.B minimum:d.B maximum:d.B minimum:d.B minimum:d.B/w.B maximum:d.B/w.B minimum:d.B/w.B outdoor indoor outdoor heating 2. If the s...
Page 6
Air conditioner hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. Then, it will become normal. Buttons and display of the remote controller. Parts and functions 1.Mode display auto cool dry heat fan 2. Swing display 3. Fan speed d...
Page 7
Air conditioner hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. Then, it will become normal. Clock set when unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follo...
Page 8
Air conditioner operation when in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and the receiver hole should be within 7 m without any obstacle as well. Don't throw the controller, prevent it from being damag...
Page 9
Air conditioner operation (4) unit stop (1) unit start mode changes as follows: press on/off button, unit starts. Previous operation status appears on display. (not timer setting) power indicator on indoor unit lights up. (2) select operation mode press mode button. For each press, operation auto co...
Page 10
Air conditioner operation press mode button. For each press, operation recommendations: cool,heat and dry operation use cool in summer. Use heat in winter use dry in spring, autumn and in damp climate. (1) unit start mode changes as follows: press on/off button, unit starts. Previous operation statu...
Page 11
Air conditioner (5) air flow direction adjustment after operation mode is selected, vertical flap will open automatically according to the mode. Referring to the fig. Cool heat cool heat about 10 o about 60 o about 10 o about 45 o about 60 o better set a temp. Difference of 3-5 c between indoor and ...
Page 12
Air conditioner operation timer operation you can let unit start or stop automatically at following times: before you wake up in the morning, or get back from outside or after you fall asleep at night. Set clock correctly before starting timer operation timer on/off power indicator on indoor unit li...
Page 13
Air conditioner timer on-off timer on-off to cancel timer mode power indicator on indoor unit lights up. (1)after unit start, select your desired operation mode. Operation mode will be displayed on lcd. On off on off timer on timer offtimer on-off blank every time the button is pressed, display chan...
Page 14
Air conditioner operation health mode operation (1) press the on/off switch. (2) press the "health" once," " is displayed, now the air conditioner is operating the health function. (3) press the "health"again,then the health function stops. The anion generator in the air conditioner can generate a l...
Page 15
Air conditioner pi pi pi emergency and test operation use this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed,the" pi "sound is heard once, which means the start of this operation. In this operation, it is possible to change the setting...
Page 16
Air conditioner comfortable sleep operation in cool mode sleep in selected mode. Before going to bed at night, you can simply press the sleep button and unit will bring you a sound one hour after sleep mode starts, temp. Will become 1 o c higher than temp. Setting. After running for another 1 hour, ...
Page 17
Air conditioner maintenance different models have different appearance cleaning of unit casing cleaning of remote controller cleaning of air filter cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. Squeeze water in the cloth, w...
Page 18
Air conditioner air filter air purifying filter 4 6 1 2 3 5 maintenance replacement of purifying filter open the inlet grille open the inlet grille by pushing each end of the inlet grille upward. Detach the standard air filter slide the knob slightly upward to release the filter,then withdraw it. De...
Page 19
Air conditioner maintenance better use of air conditioner proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windows during operation never fail to observe the followings do not sprinkle water over the unit. Do not block the inlet or outlet. Do not ...